本页内容是《多表关联的update语句》同时我们还提供济宁地区的网站建设,百度,雅虎,google的推广,点金,商友,等营销软件
请输入关键字:

标题搜索 内容搜索  

你现在所在的位置->首页->sqlserver->多表关联的update语句

多表关联的update语句

时间:[2005-9-8 10:02:13]     作者:未知

 ORACLE UPDATE 语句语法与性能分析的一点看法     选择自 aceplus 的 Blog  
关键字   ORACLE UPDATE 语句语法与性能分析的一点看法 
出处                  

ORACLE UPDATE 语句语法与性能分析的一点看法



  为了方便起见,建立了以下简单模型,和构造了部分测试数据:
  在某个业务受理子系统BSS中,
  --客户资料表
  create table customers
  (
   customer_id   number(8)    not null,  -- 客户标示
   city_name     varchar2(10) not null,  -- 所在城市
   customer_type char(2)      not null,  -- 客户类型
 
   ...
  )
  create unique index PK_customers on customers (customer_id)
  由于某些原因,客户所在城市这个信息并不什么准确,但是在
  客户服务部的CRM子系统中,通过主动服务获取了部分客户20%的所在
  城市等准确信息,于是你将该部分信息提取至一张临时表中:
  create table tmp_cust_city
  (
   customer_id    number(8) not null,
   citye_name     varchar2(10) not null,
   customer_type  char(2)   not null
  )
  

1) 最简单的形式
   --经确认customers表中所有customer_id小于1000均为'北京'
   --1000以内的均是公司走向全国之前的本城市的老客户:)
   update customers
   set    city_name='北京'
   where  customer_id<1000

2) 两表(多表)关联update -- 仅在where字句中的连接
   --这次提取的数据都是VIP,且包括新增的,所以顺便更新客户类别
   update customers  a       -- 使用别名
   set    customer_type='01' --01 为vip,00为普通
   where  exists (select 1 
                  from   tmp_cust_city b
                  where  b.customer_id=a.customer_id
                 )

3) 两表(多表)关联update -- 被修改值由另一个表运算而来
   update customers a   -- 使用别名
   set    city_name=(select b.city_name from tmp_cust_city b where b.customer_id=a.customer_id)
   where  exists (select 1 
                  from   tmp_cust_city b
                  where  b.customer_id=a.customer_id
                 )
   -- update 超过2个值
   update customers a   -- 使用别名
   set    (city_name,customer_type)=(select b.city_name,b.customer_type 
                                     from   tmp_cust_city b 
                                     where  b.customer_id=a.customer_id)
   where  exists (select 1 
                  from   tmp_cust_city b
                  where  b.customer_id=a.customer_id
                 )
   注意在这个语句中,
                                   =(select b.city_name,b.customer_type 
                                     from   tmp_cust_city b 
                                     where  b.customer_id=a.customer_id
                                    )
   与
                 (select 1 
                  from   tmp_cust_city b
                  where  b.customer_id=a.customer_id
                 )
   是两个独立的子查询,查看执行计划可知,对b表/索引扫描了2篇;
   如果舍弃where条件,则默认对A表进行全表
   更新,但由于(select b.city_name from tmp_cust_city b where
 where  b.customer_id=a.customer_id)
   有可能不能提供"足够多"值,因为tmp_cust_city只是一部分客户的信息,
   所以报错(如果指定的列--city_name可以为NULL则另当别论):
   
01407, 00000, "cannot update (%s) to NULL"
// *Cause:
// *Action:

   一个替代的方法可以采用:
   update customers a   -- 使用别名
   set    city_name=nvl((select b.city_name from tmp_cust_city b 
where b.customer_id=a.customer_id),a.city_name)
   或者
   set    city_name=nvl((select b.city_name from tmp_cust_city b 
where b.customer_id=a.customer_id),'未知')
   -- 当然这不符合业务逻辑了

4) 上述3)在一些情况下,因为B表的纪录只有A表的20-30%的纪录数,
   考虑A表使用INDEX的情况,使用cursor也许会比关联update带来更好的性能:
   
set serveroutput on

declare
    cursor city_cur is
    select customer_id,city_name
    from   tmp_cust_city
    order by customer_id;
begin
    for my_cur in city_cur loop

        update customers
        set    city_name=my_cur.city_name
        where  customer_id=my_cur.customer_id;
       
       /** 此处也可以单条/分批次提交,避免锁表情况 **/
--     if mod(city_cur%rowcount,10000)=0 then
--        dbms_output.put_line('----');
--        commit;
--     end if;
    end loop;
end;

5) 关联update的一个特例以及性能再探讨
   在oracle的update语句语法中,除了可以update表之外,也可以是视图,所以有以下1个特例:
    update (select a.city_name,b.city_name as new_name
            from   customers a,
                   tmp_cust_city b
            where  b.customer_id=a.customer_id
           )
    set    city_name=new_name
    这样能避免对B表或其索引的2次扫描,但前提是 A(customer_id) b(customer_id)必需是unique index
    或primary key。否则报错:
    
01779, 00000, "cannot modify a column which maps to a non key-preserved table"
// *Cause: An attempt was made to insert or update columns of a join view which
//         map to a non-key-preserved table.
// *Action: Modify the underlying base tables directly.

6)oracle另一个常见错误
   回到3)情况,由于某些原因,tmp_cust_city customer_id 不是唯一index/primary key
   update customers a   -- 使用别名
   set    city_name=(select b.city_name from tmp_cust_city b where b.customer_id=a.customer_id)
   where  exists (select 1 
                  from   tmp_cust_city b
                  where  b.customer_id=a.customer_id
                 )
   当对于一个给定的a.customer_id
   (select b.city_name from tmp_cust_city b where b.customer_id=a.customer_id)
   返回多余1条的情况,则会报如下错误:
   
01427, 00000, "single-row subquery returns more than one row"
// *Cause:
// *Action:

   一个比较简单近似于不负责任的做法是
   update customers a   -- 使用别名
   set    city_name=(select b.city_name from tmp_cust_city b where b.customer_id=a.customer_id)

   如何理解 01427 错误,在一个很复杂的多表连接update的语句,经常因考虑不周,出现这个错误,
   仍已上述例子来描述,一个比较简便的方法就是将A表代入 值表达式 中,使用group by 和
   having 字句查看重复的纪录
   (select b.customer_id,b.city_name,count(*)
    from tmp_cust_city b,customers a 
    where b.customer_id=a.customer_id
    group by b.customer_id,b.city_name
    having count(*)>=2
   )
   
  



作者Blog:http://blog.csdn.net/aceplus/
相关文章
ORACLE UPDATE 语句语法与性能分析的一点看法  
移动的微软移动的Windows  
[收藏]数据库设计中的反规范技术探讨  
Oracle9i与SYBASE ASE12.5相比的几个不足  
如何在已装Windowns XP机器上再装Windows 2000  
 
对该文的评论  
 aceplus ( 2005-07-04)  
/**** 改正1个错误 ****/

   一个比较简单近似于不负责任的做法是
   update customers a   -- 使用别名
   set    city_name=(select b.city_name from tmp_cust_city b 
where b.customer_id=
a.customer_id and rownum=1)

   如何理解 01427 错误,在一个很复杂的多表连接update的语句,经常因考虑不周,出现这个错误,
   仍已上述例子来描述,一个比较简便的方法就是将A表代入 值表达式 中,使用group by 和
   having 字句查看重复的纪录
   (select b.customer_id,b.city_name,count(*)
    from tmp_cust_city b,customers a 
    where b.customer_id=a.customer_id
    group by b.customer_id,b.city_name
    having count(*)>=2
   )
 
 aceplus ( 2005-07-04)  
/**** 改正1个错误 ****/

   一个比较简单近似于不负责任的做法是
   update customers a   -- 使用别名
   set    city_name=(select b.city_name from tmp_cust_city b 
where b.customer_id=
a.customer_id rownum=1)

   如何理解 01427 错误,在一个很复杂的多表连接update的语句,经常因考虑不周,出现这个错误,
   仍已上述例子来描述,一个比较简便的方法就是将A表代入 值表达式 中,使用group by 和
   having 字句查看重复的纪录
   (select b.customer_id,b.city_name,count(*)
    from tmp_cust_city b,customers a 
    where b.customer_id=a.customer_id
    group by b.customer_id,b.city_name
    having count(*)>=2
   )

 
 aceplus ( 2005-07-04)  

【声明】本站刊载的《多表关联的update语句》一文如果有侵害你权益的情况,请联系我们。我们将及时采取措施。
QQ:44637339 Email:just6@163.com Tel:13355163107 Lining studios

友情链接

本页内容是《多表关联的update语句》 返回顶部
© 2001-2024 Lining studios 济宁速创科技有限公司, All Rights Reserved
 Processed Time:62.500ms
中华人民共和国信息产业部网站备案号: 鲁ICP备09103015号-1